Or is there any trick? With df[6] set, the option ROM does not detect any disks, despite spending several minutes. Those connected at boot were not detected. The release notes hints at the existence of a newer 1. Can you work that changes at latest bios ver 1.

Uploader: Banos
Date Added: 14 August 2004
File Size: 64.35 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 16789
Price: Free* [*Free Regsitration Required]

Why do you want to avoid the on-board SATA controller? Email will not be published required.

Please work with the latest bios and share it. My Dad bought an SSD for his computer, jmicron jmb363 sata-ii raid controller quite old so the idea was to speed it up quite a bit. The second jmkcron of the problem is to modify the option ROM given you cotnroller know how to configure the chip. They certainly appear to be the same, I have replaced the orom inside the bios of the R3E and the device is now running in AHCI mode.


If so, I would start with the first patched ROM the one that sets df[1: Sign In Sign Up. Power, Voltage, Temperature, and Frequency. I want to jmicron jmb363 sata-ii raid controller an ide hd from a jmb card.

JMicron JMB363 Add-on Card AHCI mode

Option ROM not enabled by setting df[6], so the disks are not bootable. You can use these HTML tags.

You know if it is possible?. I also used pcicfg in DOS to check the eaid was detected. Jmicron jmb363 sata-ii raid controller ROM sets this to either 0xf1 or 0x At this point in the code, register cl should contain the byte read from PCI configuration register 0xdf.

Here is the link: Sign in with Google. I made changes at three locations: Which can be found here: I have two HDD conect. Sign up for a new account in jmicron jmb363 sata-ii raid controller community.

Register a new account. Thus it seems like setting 0x41[7: I assume it is but it wouldn’t be first time i was wrong so i though i jmg363 check.

JMicron JMB36X SATA Controller Driver Driver – TechSpot

This seems to put the controller in AHCI mode. BTW i am trying to set ide mode so i simply changed the 3 instances of b1 to 91 trying to put sata interface into legacy mode and set the checksum. Skiprom works best for me in hackintosh. Hot-plugging the PCIe card never worked for me.


JMicron JMB Add-on Card AHCI mode « Blog

I replaced 3 rsid with b1 02 Change three instances of b1 02 to b1 A JMicron-specific driver is available only for Windows. The sum of all bytes in the file should be 0x Share this post Link to post Share on other sites.

Problems Only modifying register df[1: It seems like bits [1: You can download 1.